Hello Foppe,

connect the midi-outs of miditemp to the instruments in (for example: miditemp-out1 to Roland JV1080 in, miditemp-out2 to Yamaha DTX-in).

!! Midifile must be saved as format 1 !!

Now load the complete midifile into miditemp press ENTER, press OUT ==› all tracks are shown (use the data-wheel). Turn data-wheel to the left side until ALL is shown in the display.
Here you see the routing for all tracks. Disconnect all out routing (press 1-8 -> so that these LEDs off).

Go to first track (data-wheel) and select the midiout (press 1 for Roland JV1080 [LED ist on], 2 for Yamaha DTX, or both if you will send this track-midi-data to out 1+2. Select all next tracks (data-wheel) route these tracks to midi-outs (like the first track). So you can route every track to one ore more outputs.

Don't forget to save the ASSIGN!!
Press ENTER ASG, SAV and save to B:\Assign.asg. This Assign.asg will be load by turn on the miditemp. In this file all routings are saved!!

Best regards

Klaus
Administrator

von
Klaus am 30.10.2004

Hallo Foppe,

die Handbücher findest du auf unserer Internet-Seite:
http://www.miditemp-forum.de/downloads/index.html

Wenn Du auch mit dem Handbuch nicht weiterkommst, so gib uns nochmals Bescheid.

Soll eine Click-Spur an ein bestehendes Midifile angehängt werden, oder ist die Click-Spur bereits im Midifile vorhanden?

If you have any problem with mp-manual, write us again. Would you append click-track to an existing midifile or is the click-track already in the file??

Viele Grüße

Klaus
Administrator

von
Klaus am 29.10.2004